FIXPER ULTRAPLUS ADHESIVE It is an adhesive mortar with high adhesion strength, elastic character, reduced slip feature, resistant to heat change, water and frost, developed, cement-based, large-sized coating material such as ceramic granite ceramic, granite, marble, natural stone, porcelain.
FIXPER ULTRAPLUS ADHESIVE; It is used for bonding solid, dust-free and low water absorption coating materials such as cement based plaster, screed, ceramic on lined concrete surfaces with low water absorption rate on horizontal and vertical surfaces indoors and outdoors. It is used for bonding granite, marble, cotto, natural stone-like coatings with low water absorption rate to interior and exterior horizontal and vertical surfaces, especially in places exposed to heavy traffic.
The surface should be dry, clean, solid and free from dust, oil, dirt or materials that prevent adhesion should be removed from the surface, materials such as mortar and cement residues should be scraped off.
Mixing Ratio It should be mixed with water in the ratio of 24 - 26% of its weight. (6.0 - 6.5 liters of water for 25 kg packaging) Low-speed electric mixer (400 rpm) Special tip mixing equipment It should be mixed with a low-speed mixer so that no dust and lumps remain. Mortar 5-10 min. After resting, 1 - 2 minutes before application. must be mixed again.
It is presented in craft bags of 25 kg net.
It should be stored in its unopened original package, in a dry (maximum 60% relative humidity) and cool (temperature between +5 C ° and +25 C °) and its shelf life is 12 months.
For easy and safe application of the product, please refer to the Safety Data Sheet (SDS).
Product features that can be seen!
Our target is always to deliver quality products based on innovative insulation techniques to our customers.